Challenger CL10

Service more vehicles and make more money with the Versymmetric® and Versymmetric® Plus CL10series 2 post lifts. Its exclusive Versymmetric® Technology provides the versatility to safely lift cars, trucks, vans and SUV’s symmetrically or asymmetrically within the same service bay, within rated capacity.

With three Versymmetric® 2 post lifts productivity configurations – Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.

directSPOT

CL10 series comes standard with offset 3-stage front arms allowing them to be stowed in an asymmetric lifting position, rear of the front tires. Unlike many competitor lifts, when the vehicle is driven through, the front arms are capable of directSPOT™ to the vehicle’s lifting point without having to reposition the vehicle or shuffle back and forth to reach its recommended lift points.

The CL10series two post lift is available in three Versymmetric® Productivity Configurations:

Other standard features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, 48″ elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release and padded overhead shut off system.

ALI/ETL certified.

Contact a Challenger representative at Automotive Specialty Equipment today for pricing.

cl10series1
Challenger CL10

The CL10 series 2 post lifts are the top pick for full service facilities. Its Versymmetric® technology means that cars can be lifted symmetrically and asymmetrically for maximized accessibility. This 2 post car lift series is designed with productivity in mind. Find out if the Complete Productivity, Maximum Productivity, or Max Plus Productivity 2 post lift is right for your professional service facility.

  1. Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential.
  2. Oversized 5″ diameter pulley and heavy duty 5/16″ cable reduces stress on 2 post lift equalization system and increases cable life.
  3. 48″ elongated carriage design decreases load on bearing.
  4. 11´ 8″ standard height with 2´ and 3´ extensions available allows lift to be placed in standard service bay with 12´ ceiling.
  5. Padded overhead shut off system prevents vehicle damage from being raised too high on 2 post car lift
  6. Fully gusseted base plate design reduces column deflection.
  7. Single point mechanical lock release system with jacket coated protection and no lock cable pulleys, and double clutch release bar protects cable from stretching while disengaging both column locks simultaneously.
  8. Rubber door guards provide added security against vehicle door damage.
auto shop equipment

The CL10 2 post lift series was designed with maximum productivity in mind. You’ll find durability and flexibility in this customizable 2 post car lift series. Versymmetric® technology allows for symmetric and asymmetric lifting while directSPOTTM capabilities ensure no time will be wasted repositioning vehicles. Read the specifics below to find which CL10 2 post lift model will work best in your professional service facility.

Model
 CL10V3 CL10V3-2 CL10V3-3 CL10V3-QC CL10V3-2QC CL10V3-3QC CL10V3-DPC CL10V3-2-DPC CL10V3-3-DPC

Lift Capacity*
10,000 lbs. (4535kg)
A Rise Height1
74-1/8″ (1908mm)
B Column Height
11′ 8″
(3556mm)
13′ 8″
(4166mm)
14′ 8″
(4470mm)
11′ 8″
(3556mm)
13′ 8″
(4166mm)
14′ 8″
(4470mm)
11′ 8″
(3556mm)
13′ 8″
(4166mm)
14′ 8″
(4470mm)
C Cylinder Overall
(Full Stroke)
11′ 11″ (3632mm)
DAdjustable Width Overall
11′ 6-1/2″ / 11′ 11″
(3518mm / 3632mm)
E Drive-Thru Clearance2
100-1/2″ / 105″
(2553mm / 2667mm)
F Floor to Overhead Switch2
11′ 2-1/2″
(3416mm)
13′ 2-1/2″
(4026mm)
14′ 2-1/2″
(4331mm)
11′ 2-1/2″
(3416mm)
13′ 2-1/2″
(4026mm)
14′ 2-1/2″
(4331mm)
11′ 2-1/2″
(3416mm)
13′ 2-1/2″
(4026mm)
14′ 2-1/2″
(4331mm)
G Front Arm Reach (Min/Max)
Min. 19-13/16″ / Max. 42″
(956mm / 1524mm)
H Rear Arm Reach (Min/Max)
Min. 37-5/8″ / Max. 60″
(956mm / 1524mm)
I Screw Pad Height3
Min. 3-7/8″ / Max. 6-1/2″
(98mm / 161mm)
J Inside Columns2
110″ / 114-1/2″
(2794mm / 2908mm)
K Low Lock Height
12″ (305mm)
Motor
2HP
3HP
2HP
Voltage
208v – 230v (Single Phase Standard)4
Speed of Rise
48 seconds
27 seconds (approx.)
48 seconds
Max. Load per Arm
2,500 lbs. (1134kg)
Ceiling Height Required
12′
(3658mm)
13′ 9″
(4191mm)
14′ 9″
(4496mm)
12′
(3658mm)
13′ 9″
(4191mm)
14′ 9″
(4496mm)
12′
(3658mm)
13′ 9″
(4191mm)
14′ 9″
(4496mm)

*Lift capacity ratings are based on loads equally distributed on all four arms.  1 Rise Height is measured with adjustable screw pads in highest position.  2 Specifications are listed with lift at maximum width and/or height settings.  3Specifications are listed without rubber pad, for measurements with rubber pad add 1/4″ (6mm). 4 Optional 3 phase electrical also available (Not available for Quick Cycle models). Specify at time of order.  Standard lift colors are Red and Blue. Optional colors available.
Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

auto shop equipment
CL10series 2 post car lift elongated lifting carriage.
CL10series two post auto lift gusseted base plate.
CL10series 2 post lift features a padded overhead shut off system.
CL10series 2 post lift features sleeved cross tubes.
CL10series two post automotive lift features oversized pulleys.
CL10series two post lifts with custom paint job.
CL10series 2 post car lift -Versymmetric® lifting at its best.
CL10series two post automotive lift - Aston Martin service facility.
CL_A2006-3
CL10series two post automotive lift - CL10V3's at Gateway Ford Lincoln Mercury car dealership.
CL10series 2 post hydraulic lift - CL10V3's at Fox Toyota car dealership.
CL10series Versymmetric® two post automotive lift.
THK_1
CL10series 2 post hydraulic lift - Toyota of Nicholasville car dealership.
CL10series - BB’s EuroMotors.
CL10series Car lift
CL10series versymmetric plus car lift
CL10series Car lift
CL10series versymmetric plus car lift
CL10series Car lift
CL10series Versymmetric® two post automotive lift - lift cars, SUVs, and small/mid size trucks
CL10series Car lift
CL10series versymmetric plus car lift
CL10series Car lift
CL10series versymmetric plus 2 post lift- open door clearance

10314

Part # 10314

Pair of frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts.

Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.

10304_10inExtensionAda0004

Part # 10304

Pair of 10″ slip-on height extensions for CL9 and CL10 two post automotive lifts. 10″ Slip-on height extension adapters for CL9 and CL10 two post automotive lifts manufactured prior to Nov. 4, 2007. These automotive lift adapters simply slip-on over the the existing lift foot pads providing access to a vehicle’s designated pickup points. Ideal for lifting automobiles with step rails.

10305_4_6inAdaptors

Part # 10305

6″ slip-on height extensions with organizer kit for CL9 & CL10 two post automotive lifts. 6″ Slip-on height extension adapters for CL9 and CL10 two post automotive lifts manufactured prior to Nov. 4, 2007. These automotive lift adapters simply slip-on over the existing lift foot pads providing access to a vehicle’s designated pickup points. Ideal for lifting automobiles with step rails. Includes organizer kit that mounts to the column of the CL9 and CL10 two post automotive lifts and conveniently stores extensions so they are always within reach.

10313_stacks

Part # 10313

Pair of 6″ Stack Adapter Extensions for 10K and 12K lb. capacity two post automotive lifts. Drop-in style Stack Adapters for two post automotive lifts. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack adapters help reach pickup points on vehicles with running boards or side steps.

10315

Part # 10315

Stack Adapter Kit for 10,000 and 12,000 lb. two post automotive lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3″ Stack Extensions, two 6″ Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.

10316

Part # 10316

Organizer Rack to hold Stack Adapter Extensions for two post automotive lifts. Organizer rack mounts to the column of two post automotive lifts to conveniently store extensions so they are always within reach.

10318

Part # 10318

Set of 4 frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts. Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.

B10264_AirElectricWor#0014

Part # B10264

Air and Electric workstation with filter, lubricator and regulator for two post car and truck lifts. Increase productivity with air supply and electric outlets on the car and truck lift column. Convenient power source for extension lights and other tools needed when servicing cars and trucks. Air supply will always be at arms reach for facilities using pneumatic tools such as impact wrenches.

CL_A2006-2

Part # A2006-2

2 foot Column Extension for CL10series car and truck lift. Increase technician working height underneath cars and trucks with column height extensions. Perfect for servicing taller profile vehicles

CL_A2006-3

Part # A2006-3

3 foot Column Extension for CL10series car and truck lift. Increase technician working height underneath cars and trucks with column height extensions. Perfect for servicing taller profile vehicles.

THK_1

Part # THK

Tire Hanger Kit for CLFP9 and CL10series two post car and truck lifts. Make car and truck servicing easy with our Tire Hanger Kit. Holds front and rear tires with swing arms – perfect for brake work and tire rotations. Includes auto lift column and arm mounting brackets with hardware.

B99700

Part # B99700

Tire Tool Manager Work Station with Filter, Lubricator and Regulator for CL10series two post car and truck lifts. Increase productivity with air supply on the car and truck lift column.

Browse Below to Find the Car Lift Parts to Match Your Needs

Challenger Lifts offers a number of different two post car lift accessories for your CL10series lift. Whether you’re looking for stack adapter kits, height extensions, or any other accessory, we can help you. Browse our list of car lift parts and accessories below. Or, Contact a Challenger Lifts Representative for more information.

Download Brochure