Challenger CL12 Two Post Vehicle Lift

Service more vehicles and make more money with Challenger Lifts’ new CL12, 12,000 lb. capacity two post lift. The new CL12 comes standard with 3-stage front and 3-stage rear arms providing the advantage of lifting many common cars, trucks, vans and SUVs within rated capacity.

The CL12 has features you would expect to pay more for like geared arm restraints, 3-stage front and rear arms, and necessary adapters for lifting trucks. In fact, no other car lift company gives you more.

All CL12 lb. capacity vehicle lifts come standard with Part# 10315 Stack Adapter Extension Kit and #10318 Four Frame Engaging Truck Adapters. Frame engaging adapters (Part #10314 or 10318) are REQUIRED when lifting vehicles with frame construction such as trucks.

ALI/ETL certified.

 

Contact a Challenger representative at Automotive Specialty Equipment today for Two Post Lifts Items pricing.

CL12

If you’re looking for a heavy duty lift that can service more vehicles and help you make more money, the CL12 is the 2 post lift for you. This lift comes standard with a variety of superior features, which you can read about below. Questions? Contact us today.

In the table below, view detailed specifications for each of the CL12 2 post lifts, including the CL12, CL12-1 and the CL12-2. Compare overall height, shipping weight, required ceiling height and other specs side-by-side. If you have questions about the CL12 heavy duty lift, contact us today.

Model Number
CL12 CL12-1 CL12-2/th>

Lift Capacity*

12,000 lbs. (5443kg)
A Rise Height1
84-3/4″ (2153mm)
B Height Overall
13′ 8″
(4166mm)
14′ 8″
(4470mm)
15′ 8″
(4775mm)
C Width Overall
11′ 10″ (3607mm)
D Drive-Thru Clearance
103-1/2″ (2629mm)
E Floor to Overhead Switch
157″
(3988mm)
169″
(4293mm)
181″
(4597mm)
F Arm Reach (Min)
27 1-2″ (700mm)
G Arm Reach (Max)
59″ (1500mm)
H Adj. Adapter Height2
5″ / 6-5/8″
(127mm / 168mm)
I Adj. Adapter Height2
(with medium extensions)
8″ / 9-5/8″
(203mm / 244mm)
J Adj. Adapter Height2
(with high extensions)
11″ / 12-5/8″
(279mm / 320mm)
K Inside Columns
114-1/2″ (2908mm)
Air Supply Required
85 – 115 psi
Motor
2HP
Voltage (Single Phase Standard)3
208v – 230v
Speed of Rise
60 seconds
Ceiling Height Required
13′ 9″
(4191mm)
14′ 9″
(4496mm)
15′ 9″
(4801mm)
Shipping Weight
2025 lbs. (919 kg)
2045 lbs. (928 kg)
2125 lbs. (964 kg)

*Lift capacity ratings are based on loads equally distributed on all four arms.  1 Rise Height is measured with high extension.  2 Medium and high auxiliary adapter extensions are standard.  3Optional 3 phase electrical also available. Specify at time of order.
Standard lift colors are Red and Blue. Optional colors available.
Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

10313_stacks

Part # 10313

Pair of 6″ Stack Adapter Extensions for 10K and 12K lb. capacity two post automotive lifts. Drop-in style Stack Adapters for two post automotive lifts. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack adapters help reach pickup points on vehicles with running boards or side steps.

10314

Part # 10314

Pair of frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts.

Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.

10315

Part # 10315

Stack Adapter Kit for 10,000 and 12,000 lb. two post automotive lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3″ Stack Extensions, two 6″ Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.

10316-1

Part # 10316

Organizer Rack to hold Stack Adapter Extensions for two post automotive lifts. Organizer rack mounts to the column of two post automotive lifts to conveniently store extensions so they are always within reach.

10314

Part # 10318

Set of 4 frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts. Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.

B10264

Part # B10264

Air and Electric workstation with filter, lubricator and regulator for two post car and truck lifts. Increase productivity with air supply and electric outlets on the car and truck lift column. Convenient power source for extension lights and other tools needed when servicing cars and trucks. Air supply will always be at arms reach for facilities using pneumatic tools such as impact wrenches.

Challenger Lifts offers a variety of add-on accessories for the powerful CL12 2 post lift. From stack adapter extensions to organizer racks and more, you can browse our selection below. Contact us today to request more information about this heavy duty lift.