Challenger 4015series Four Post Lifts

Challenger Lifts’ 4015series 15,000 lb. four post automotive lifts are the complete package for expanding your service offering and revenue potential. The 4015series four post lift comes in several productivity configurations including open front general service flat deck auto lifts and closed front general service flat deck auto lifts and alignment rack vehicle lift packages that support today’s latest camera imaging alignment systems. With the 4015series four post automotive lift, shops are able to service small passenger cars and medium-duty trucks, vans and fleet vehicles on one automotive lift.

The 4015 series 4-post hydraulic auto lifts have a cable lifting design, operate on 208-230v single phase electrical power (optional 3-phase available), have a single point air actuated lock release that disengages all column locks simultaneously for maximum productivity and workflow. 4015series four post auto lifts boast the most working room underneath the runways with the highest rise in the industry at 78”, and the lowest profile runways in the auto lift business at 7”. With large 9 ½” steel pulleys with Teflon® bearings, ½” cable thickness, fully gusseted base plate and top shroud, offset wrapped column design and louvered approach ramps with anti-skid runway surfaces, the 4015series four post lift is built to lift and built to last.

Alignment Rack models include a package of two 7,500 lb. rolling jacks, internal air line system for the dual rolling jacks, flush mount stainless steel turning radius gauges, rear slip plates, multi-position work-steps and automatic wheel stops.

Featuring a maximum wheelbase range of 182 ½” or 210”, the 4015 four post automotive lift accommodates everything from smaller passenger cars and trucks to medium duty fleet operation vehicles for general service. And with a 4 wheel alignment range (Alignment Rack auto lift models only) from 88” to 158”, shops broaden their service capabilities and make more money by performing alignments on all sorts of vehicles.

ALI/ETL certified.

 

Contact a Challenger representative at Automotive Specialty Equipment today for pricing.

4015series

For a 4 post hydraulic lift that can be customized to your needs, look to the 4015 4 car post lift series. These lifts can be configured to several different productivity settings that allow for a variety of options for repair work. Read the features and benefits of this 4 post hydraulic lift series below.

Are you looking for a powerful 4 post hydraulic lift? You can find what you need in the 4015 4 post car lift series, which are designed for ultimate productivity. The series features a variety of productivity configurations for optimal working conditions. Read the specifications below to find out if this 4 post hydraulic lift is for you.

 

Open Front
Closed Front
Alignment Rack Package
Flat Deck
Alignment Rack Package
Flat Deck
Model Number
AR4015EAO
AR4015XAO
4015EFO
4015XFO AR4015EAX AR4015XAX 4015EFX 4015XFX

Lift Capacity

15,000 lbs.
15,000 lbs.
A Length Overall
20′ 9″ (6325mm)
23′ (7010mm)

20′ 9″ (6325mm)

23′ (7010mm)
20′ 4-1/2″ (6210mm)
22′ 8″ (6909mm)
20′ 4-1/2″ (6210mm)
22′ 8″ (6909mm)
B Width Overall
11′ 10″ front – 11′ 2-1/2″rear
(3607mm front – 3416mm rear)
11′ 2-1/2″
(3416mm)
CInside Columns
120″ front – 120″ rear
(3048mm front – 3048mm rear)
120″
(3048mm)
D Between Columns
195″ (4953mm)
222 1/2″ (5652mm)
195″ (4953mm)
222 1/2″ (5652mm)
196″ (4978mm)
223 1/2″ (5677mm)
196″ (4978mm)
223 1/2″ (5677mm)
E Height of Columns
8′ 3-1/2″ front – 7′ 9-1/2″rear
(2527mm front – 2375mm rear)
7′ 6-1/2″
(2299mm)
F Height of Runways
7″ (178mm)
7″ (178mm)
G Width of Runways
20″ (508mm)
20″ (508mm)
H Width between Runways
(Minimum / Maximum)
43″ (1092mm)
40″ / 43″
(1016mm / 1092mm)
I Maximum Wheelbase1
182 1/2″
(4635mm)
210″
(5334mm)
182 1/2″
(4635mm)
210″
(5334mm)
182 1/2″
(4635mm)
210″
(5334mm)
182 1/2″
(4635mm)
210″
(5334mm)
J Rise Height
78″ (1981mm)
78″ (1981mm)
Max. 2 Wheel Alignment
166 1/2″ (4229mm)
194″ (4927mm)
N/A
166 1/2″ (4229mm)
194″ (4927mm)
N/A
4 Wheel Alignment
88″ – 158″
(2235mm – 4013mm)
N/A
88″ – 158″
(2235mm – 4013mm)
N/A
Air Supply Required
90 -120 psi Clean & Dry
90 -120 psi Clean & Dry
Motor
2HP
2HP
Voltage (1 Phase Std.)2
208v – 230v
208v – 230v
Speed of Rise
85 seconds
85 seconds
Min. Recomm. Bay Size
12´ x 24″
12´ x 26″
12´ x 24″
12´ x 26″
12´ x 24″
12´ x 26″
12´ x 24″
12´ x 26″
Shipping Weights
4800 lbs.
(2177 kg)
4950 lbs.
(2245 kg)
3980 lbs.
(1805 kg)
4160 lbs.
(1887 kg)
4400 lbs.
(1996 kg)
4600 lbs.
(2087 kg)
3610 lbs.
(1637 kg)
3790 lbs.
(1719 kg)

1 Maximum wheelbase is based on a tire diameter of 30″.
2 Optional 3 phase electrical also available.
Standard Lift colors are Red and Blue. Optional colors available.

10266

Part # 10266

Ramps are 52″ in length and feature anti-skid surface for positive vehicle traction for driving through four post automotive lifts. Available for 4P12series and 4015series four post car and truck lifts.

10310

Part # 10310

Air and Electric workstation with filter, lubricator and regulator for four post car and truck lifts. Increase productivity with air supply and electric outlets on the four post automotive lift column. Convenient power source for extension lights and other tools needed when servicing cars and trucks. Air supply will always be at arms reach for facilities using pneumatic tools such as impact wrenches.

10342

Part # 10342

Hanging tool holder for oil drain pan #10267, for four post lift lube racks. Hangs on oil drain pan #10267 which rolls on four post lube rack, providing access to oil change tools.

3PH4P

Part # 3PH4P

4015series 4-post lift Power Unit Upgrade to 3 Phase.

RJ7_5

Part # RJ7.5

7,500 lb. capacity Rolling Jack for 4015series four post automotive lifts features air/hydraulic operation and includes (4) 3″ stack adapters. Broaden your service revenue with easy access to brakes and wheels from underneath four post lifts. 7,500 lb. capacity rolling jacks features adjustable width, low vehicle drive-over clearance, stackable height extensions with built-in storage rack and factory installed and protected filter lubricator and regular.

40230E

Part # 40230E

Internal air line kit for dual rolling jack operation on 15,000 lb. capacity four post automotive lifts. Internal airline kit, #40230E provides air for dual rolling jack on the 4015series standard length four post lifts. #40230X provides air for dual rolling jack operation on the 4015series extended length four post lifts.

10267

Part # 10267

Increase productivity while servicing cars and trucks on our four post lube rack. Features a baffled splash resistant design and large capacity to reduce the number of times it needs to be emptied.

40200-3D

Part # 40200-3D

Bolt on alignment kit without radius gauges for 4P12series and 4015series four post automotive lifts. General service four post automotive lifts can be turned into an alignment capable four post lift with bolt on alignment kit and turning radius gauges (sold separately) . Four post lift bolt on alignment kits are 3D alignment capable.

40200-3DSS

Part # 40200-3DSS

Bolt on alignment kit with Stainless Steel radius gauges for 4P12series and 4015series four post automotive lifts. Turn your 4P12series or 4015series four post general service lift into an alignment capable four post lift. 40200-3DSS Bolt on alignment kit is 3D alignment capable and includes 10500SS stainless steel turning radius gauges to complement your servicing needs.

10500SS

Part # 10500SS

Stainless Steel turning radius gauges for 4P12series, 44018AR and 4015series four post car and truck lifts. Turning radius gauges are used for front wheel alignments to measure how many degrees the front wheels are turned left or right. They are commonly used when measuring caster, camber and toe-out on turns for alignment capable automotive lifts. General service four post automotive lifts can be turned into alignment capable four post lifts with a bolt on alignment kit (Part #40200-3DSS) which includes stainless steel turning radius gauges.

40200-3DBK

Part # 40200-3DBK

Bolt on alignment kit with powder coated black radius gauges for 4P12series and 4015series four post automotive lifts. Turn your 4P12series or 4015series four post general service lift into an alignment capable four post lift. 40200-3DBK Bolt on alignment kit is 3D alignment capable and includes 10500 stainless steel turning radius gauges to complement your servicing needs.

If you need four post car lift accessories for your 4015series lift, look no further. Below you’ll find a selection of accessories suitable for your every need. Contact a Challenger Lifts representative today for more information.